building & garage restoration

- Masonry Restoration

- Concrete Restoration

- Building Cleaning 

- Expansion Joints

- Sealants

Roofing (modified, single-ply, built-up)

Single Ply Membranes

- EPDM - TPO - PVC

Mechanically Attached, Fully Adhered, 

Ballasted

Built Up Membranes (B.U.R) 

- Asphalt 

Hot Applied, Cold Applied

​

Modified Bitumen Membranes 

- APP - SBS 

Hot Applied, Cold AppliedHot Air, Torched

Standing Seam / Metal Roofing 

- Barrel - Curved - Straight

Insulation

- Flat Stock - Crickets - Fully Tapered

Sheet Metal

- Coping - Flashing - Counter Flashing

- Metal Wall Panels - Gutters

- Collector Hands - Downspouts

- Fascia - Trim - Soffits 

roof coating

Clay Tile, Asphalt Shingles

Mechanically Attached 

​

Pressure wash exterior roof surfaces using equipment capable of producing 3,000 psi @ 5 gpm. Torque existing fasteners, replace missing or broke fasteners and treat rust according to specifications. Apply knife grade sealant and mesh to fasteners and laps according to specifications. Apply 2 coats of specified roof coating according to specifications to prepared areas.

Elastomeric Roof Coatings 

- Silicone - Urethane - Acrylic

waterproofing

Wet Seal Glazing (Glass to frame and metal to metal)

Remove existing gasket/sealant as required and clean bonding surfaces using the two cloth method. Install approved silicone sealant to prepare joints dry toning free of wrinkles and air pockets.

​

Pressure wash exterior vertical masonry surfaces using equipment capable of producing 3,000 psi @ 5 gpm. Address masonry cracks according to specifications. Apply 2 coats of specified elastomeric coating at 80-100 sq.ft. per  gallon to prepared areas.

Elastomeric Wall Coating 

- Silicone - Urethane - Acrylic